This smart carbon dioxide controller monitors and manages CO2 levels in home and indoor-growing environments. Its 2 outlets provide independent programming for connected CO2 regulators and exhaust fans, allowing CO2 output and removal equipment to operate in response to measured carbon dioxide levels.
The controller includes CO2 and fan trigger modes, precision cycles, night scheduling, alarms, and historical environmental data tracking. Its 12 ft. photoacoustic sensor provides CO2 readings for greenhouses, grow rooms, grow tents, workrooms, labs, and other compatible spaces.
Key Features
-
Independent Outlet Control: Powers and independently programs up to 2 connected devices.
-
CO2 Management: Controls compatible CO2 output and exhaust equipment in response to changing carbon dioxide levels.
-
Alternating Programming: CO2 and fan modes can dynamically alternate to increase or decrease CO2 levels.
-
CO2 Mode: Activates connected CO2 equipment when readings fall below the programmed threshold and switches it off when readings rise above the threshold.
-
Fan Mode: Activates a connected fan when CO2 readings meet or exceed the programmed threshold.
-
Cycle Programming: Provides customizable on and off durations for connected equipment.
-
Night Scheduling: Allows each outlet to be switched off during a programmed nighttime period.
-
High and Low Alarms: Provides adjustable high and low CO2 alarm thresholds.
-
Historical Tracking: Displays CO2 data across adjustable timescales with minimum and maximum PPM levels.
-
Photoacoustic Sensor: Uses photoacoustic technology to measure carbon dioxide levels.
-
Active Monitoring: Displays outlet status, CO2 readings, trends, clock information, and cycle status.
-
Wall-Mountable Housing: Features a fire-resistant casing with a keyhole hanger for wall mounting.
Specifications
-
Controller Dimensions: 2.95 x 4.72 x 1.10 in.
-
Display Size: 2.53 x 2.98 in. (6.43 x 7.57 cm)
-
Power Cord Length: 53 in. (4.4 feet)
-
Sensor Probe Length: 144 in. (12 feet)
-
Outlets: 2
-
Maximum Power Supported: 1100 W
-
Programming: Independent
-
Sensor: Carbon dioxide
-
Sensor Technology: Photoacoustic
-
CO2 Range: 0-10,000 PPM
-
Displayed Sensor Reading Range: 0-5000 PPM
-
Operating Voltage: 100 to 240V
-
Current: 10 A
-
Wall Adapter Input: 100 to 240V AC
-
Operating Humidity: 35 to 85% RH
-
Manual Calibration Range: -500 PPM to 500 PPM
-
Auto-Calibration Baseline: 400 PPM
Compatibility
Compatible With: CO2 regulators and exhaust fans
Maximum Supported Load: Up to 1100 W
Verified Applications: Greenhouses, grow rooms, grow tents, workrooms, labs, and home environments
Included
- CO2 controller x1
- CO2 sensor x1
- Wall-hang wood screws x3
- Wire mount x1
Warranty
Warranty: 2 years from the date of purchase
