Shingles & Paint are not included but are easily available at local hardware stores.
- Concrete Slab Flooring Option:
- Recommended slab size is ½" smaller than the shed dimensions to prevent water entry.
- Contact us about our custom, pressure-treated flooring options.
All sales are final. No returns are accepted.
Get Ready for Assembly
You will go from site preparation to a finished barn in a couple of easy steps. Your shed kit contains valuable instructions on how to build it when it arrives, but here's what you need to know ahead of time.
Tools You'll Need
- Roof materials: shingles or metal sheeting
- Exterior paint
- Floor materials if you did not purchase the optional floor kit
- Tape measure
- Drill and a #2 square drive bit
- Step ladder
- Speed square
- Level
- Chalk line
- Ham
Prep & Assembly
Step 1: Site Prep
A level site is the most important step when it comes to preparing for your build. Your building will only be as level as the site it sits on. For this process to go smoothly, have the site fully prepared before the shed kit arrives.
For Level Ground
- 1. Mark off an area 12 inches wider than the shed on all four sides.
- 2. Remove 3 to 4 inches of sod from the area you marked off.
- 3. Fill the area with no. 8 or no. 57 limestone.
- 4. Spread the limestone and make sure it is level.
For Sloped Ground
- 1. Place treated 4x4s horizontally within the shed footprint. Space them approximately every 6 feet.
- 2. Raise the horizontal 4x4s by digging vertical 4x4s on high sides or concrete blocks on low sides.
- 3. Make sure all the 4x4s are level so that the platform for the shed is level.
Step 2: Delivery
The carrier will deliver your EZFIT Shed kit to your location. Plan to have at least two people at the delivery site to manually open the package and unload the kit pieces from the back of the truck.
Step 3: Assembly
Our shed kits come in panelized sections for easy assembly. The siding is primed and ready for you to add to your finish. Make sure you have your site prepped and the materials you'll need so that you can get started when it arrives!