This pond fountain produces a classic three-tiered water pattern capped by a prominent center column. It is designed for medium-sized residential ponds and properties, where the distinct separation between the tiers creates a decorative focal point and a visible ripple effect across the water.
The 1½ hp configuration circulates 115 gallons of water per minute and produces an approximately 15-foot-high by 30-foot-wide display. It requires a minimum water depth of 50 inches.
Its stainless-steel, oil-free submersible motor is designed for continuous operation in fresh water and salt water. It requires no oil changes, routine motor maintenance, or separate control box.
Key Features
Classic Three-Tier Display: Produces a stately water pattern with distinct separation between all three tiers and a prominent center column.
Decorative and Functional Design: Adds a visual focal point while supporting oxygen transfer and water circulation.
High-Volume Water Flow: Circulates 115 gallons of water per minute.
Wide Water Display: Produces an approximately 15-foot-high by 30-foot-wide fountain pattern.
Oil-Free Motor: Uses an oil-free submersible motor that does not require oil changes.
Stainless-Steel Motor: The submersible motor is manufactured using stainless steel.
Continuous Operation: Designed for 24-hour-per-day operation.
Freshwater and Saltwater Use: Approved for operation in both fresh water and salt water.
Low-Maintenance Design: No routine motor maintenance is required.
No Control Box Required: Operates without a separate control box.
Winter-Ready Installation: Can remain installed during winter with the power turned off and be restarted after the water thaws.
Subzero-Condition Durability: Components are engineered to withstand subzero temperatures without damage.
Optional Lighting: Compatible fountain light kits can be added during the original purchase or installed later.
Extended Cord Availability: The electric power cord can be ordered in lengths greater than the supplied 100-foot cord.
Made in the USA: Manufactured in Holland, Michigan.
Safety Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Specifications
Motor Rating: 1½ hp
Voltage: 230 volts
Motor Type: Oil-free, submersible motor
Motor Material: Stainless steel
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 10.6 amps
Flow Rate: 115 gallons per minute
Spray Pattern: Approximately 15 feet high by 30 feet wide
Minimum Pond Depth: 50 inches
Selected Power Cord Length: 100 feet
Supplied Power Cord Gauge: 12-gauge
Power Cord Type: Submersible electric power cord
Maximum Cable Length With 12-Gauge Cable: 310 feet from the motor to the main power source
Maximum Cable Length With 10-Gauge Cable: 480 feet from the motor to the main power source
Maximum Cable Length With 8-Gauge Cable: 770 feet from the motor to the main power source
Maximum Cable Length With 6-Gauge Cable: 1,200 feet from the motor to the main power source
Maximum Cable Length With 4-Gauge Cable: 1,870 feet from the motor to the main power source
Maximum Cable Length With 2-Gauge Cable: 2,850 feet from the motor to the main power source
Extended Cord Availability: Longer electric power cords are available.
Extension Cord Restriction: Do not use an extension cord to supply power to the motor.
Required Anchor Weight: Two 45-pound weights or concrete blocks
Required Anchoring Ropes: Two nylon ropes
Operating Schedule: Designed for 24-hour-per-day operation
Alternative Electrical Configurations: Three-phase and/or 50 Hz configurations are also available.
GFCI Requirement: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Maintenance Requirement: No maintenance required
Control Box Requirement: No separate control box required.
Size Guide
Minimum Pond Depth: 50 inches
Spray Height: Approximately 15 feet
Spray Width: Approximately 30 feet
Compatibility
Compatible With: Freshwater and saltwater ponds with a minimum water depth of 50 inches.
Electrical Compatibility: 230-volt, 60 Hz, single-phase electrical service.
Application Compatibility: Designed for medium-sized residential ponds and properties.
Optional Lighting Compatibility: Compatible fountain light kits can be added during the original purchase or installed later.
Included
1½ hp, 230-volt pond fountain
100-foot, 12-gauge submersible electric power cord
Not Included
Two 45-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
