Key Features
Classic Three-Tier Display: Creates a stately water pattern with three clearly separated tiers capped by a prominent center column.
Decorative Pond Feature: Provides a distinctive focal point and creates a visible ripple effect across the water’s surface.
High-Volume Water Flow: Circulates 55 gallons of water per minute.
Oil-Free Motor: Uses an oil-free submersible motor that does not require oil changes.
Stainless-Steel Motor: The submersible motor is manufactured using stainless steel.
Continuous Operation: Designed for 24-hour-per-day operation.
Freshwater and Saltwater Use: Approved for operation in fresh water and salt water.
Low-Maintenance Design: No routine motor maintenance is required.
No Control Box Required: Operates without a separate control box.
Winter-Ready Installation: Can remain installed in the water during winter with the power turned off and be restarted after the water thaws.
Subzero-Condition Durability: Components are engineered to withstand subzero temperatures without damage.
Optional Lighting: White LED and color-changing LED light sets can be added during the original purchase or installed later.
Extended Cord Availability: The electric power cord can be ordered in lengths greater than the standard cord.
Made in the USA: Manufactured in Holland, Michigan.
Safety Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Specifications
Motor Rating: ¾ hp
Voltage: 230 volts
Motor Type: Oil-free, submersible motor
Motor Material: Stainless steel
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 6.8 amps
Flow Rate: 55 gallons per minute
Spray Pattern: Approximately 10 feet high by 20 feet wide
Minimum Pond Depth: 44 inches
Selected Cord Length: 100 feet
Standard Cord Specification for This Motor: 70 feet, 12-gauge, submersible
Extended Cord Availability: Longer electric power cords are available.
Maximum Cable Length With 12-Gauge Cable: 480 feet from the motor to the main power source
Maximum Cable Length With 10-Gauge Cable: 760 feet from the motor to the main power source
Maximum Cable Length With 8-Gauge Cable: 1,200 feet from the motor to the main power source
Maximum Cable Length With 6-Gauge Cable: 1,870 feet from the motor to the main power source
Maximum Cable Length With 4-Gauge Cable: 2,890 feet from the motor to the main power source
Maximum Cable Length With 2-Gauge Cable: 4,370 feet from the motor to the main power source
Extension Cord Restriction: Do not use an extension cord to supply power to the motor.
Required Anchor Weight: Two 20-pound weights or concrete blocks
Required Anchoring Ropes: Two nylon ropes
Operating Schedule: Designed for 24-hour-per-day operation
Alternative Electrical Configurations: Three-phase and/or 50 Hz configurations are also available.
GFCI Requirement: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Maintenance Requirement: No maintenance required
Control Box Requirement: No separate control box required
Size Guide
Minimum Pond Depth: 44 inches
Spray Height: Approximately 10 feet
Spray Width: Approximately 20 feet
Compatibility
Compatible With: Freshwater and saltwater ponds or lakes with a minimum water depth of 44 inches.
Electrical Compatibility: 230-volt, 60 Hz, single-phase electrical service.
Selected Cord Configuration: The selected product option includes a 100-foot cord.
Optional Lighting Compatibility: White LED and color-changing LED fountain light sets can be added during the original purchase or installed later.
Included
¾ hp, 230-volt pond fountain
100-foot electric power cord selected with this configuration
Not Included
Two 20-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
