The Baystone Fountain is designed for small residential ponds and produces a distinctive center peak surrounded by a traditional outer spray pattern. Its moving-water display enhances the pond’s appearance while helping support a healthier aquatic environment.
This configuration features a ¾-hp, 115-volt motor that delivers a flow rate of 65 gallons per minute. It produces a spray pattern measuring up to 10 feet high by 25 feet wide and requires a minimum pond depth of 44 inches.
The stainless-steel, oil-free, submersible motor requires no oil changes, routine maintenance, or separate control box. It is designed for fresh or salt water and continuous operation.
Key Features
Distinctive Spray Pattern: Produces a center peak surrounded by a traditional outer spray pattern.
Residential Pond Application: Designed for small residential ponds.
Water Flow: Moves water at a rate of 65 gallons per minute.
Oil-Free Motor: Eliminates the need for motor oil changes.
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
Low-Maintenance Design: No routine maintenance or separate control box is required.
Continuous Operation: Designed for operation 24 hours per day.
Freshwater and Saltwater Use: Approved for operation in fresh and salt water.
Cold-Weather Installation: May remain installed during freezing conditions after the power is switched off. Power can be restored after the ice thaws.
Easy Installation: Designed for straightforward installation in a suitable pond.
Optional Lighting: Compatible light kits may be selected during purchase or added later.
Made in the USA: Manufactured in Holland, Michigan.
Specifications
Motor Power: ¾ hp
Voltage: 115 V
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 10.7 amps
Flow Rate: 65 gallons per minute
Spray Dimensions: Up to 10 feet high × 25 feet wide
Minimum Pond Depth: 44 inches
Supplied Power Cord: 100 feet long, 10-gauge, submersible, with plug
Longer Power Cord Availability: Electric power cords may be ordered in greater lengths.
Maximum Main-Breaker Distance: The distance from the main breaker to the fountain must not exceed 100 feet for proper 115-volt motor operation. A 230-volt motor should be selected when the distance exceeds 100 feet.
Motor Construction: Stainless-steel, oil-free and submersible
Water Compatibility: Fresh water and salt water
Operating Capability: Designed for 24-hour-per-day operation
Maintenance Requirement: No routine maintenance or oil changes required
Control Box Requirement: No separate control box required
Required Anchoring Weight: Two 20-pound weights or concrete blocks
Required Anchoring Lines: Two nylon ropes
Electrical Protection: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
Spray Height: Up to 10 feet
Spray Width: Up to 25 feet
Minimum Pond Depth: 44 inches
Compatibility
Compatible With: Small residential freshwater and saltwater ponds.
Electrical Application: 115-volt installations where the distance from the main breaker to the fountain does not exceed 100 feet.
Compatible Lighting: Optional fountain light kits offered for this product may be added during purchase or installed later.
Included
Baystone brass nozzle
100-foot, 10-gauge submersible electric power cord with plug
Not Included
Two 20-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
