The Baystone Fountain is designed for small residential ponds and creates a distinctive center peak surrounded by a traditional outer spray pattern. Its moving-water display enhances the pond’s appearance while helping support a healthier aquatic environment.
This configuration uses a ½-hp, 230-volt motor and includes a 70-foot, 12-gauge power cable. The motor draws 5 amps, while the official motor chart specifies a minimum anchoring weight of 25 pounds per anchor point.
The stainless-steel, oil-free, submersible motor requires no oil changes, routine maintenance, or separate control box. It is suitable for fresh or salt water and may remain installed during freezing conditions when switched off until the ice thaws.
Key Features
-
Distinctive Spray Pattern: Creates a center peak surrounded by a traditional outer spray pattern.
-
Residential Pond Application: Designed specifically for small residential ponds.
-
Oil-Free Motor: Eliminates the need for motor oil changes.
-
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
-
Low-Maintenance Design: Requires no routine maintenance or separate control box.
-
Freshwater and Saltwater Use: Designed for operation in both fresh and salt water.
-
Cold-Weather Installation: May remain installed during freezing weather after the power is switched off. Power can be restored after the ice thaws.
-
Optional Lighting Selection: The product page provides a selectable light-set option; the selected configuration does not include a light set.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: ½ hp
-
Voltage: 230 V
-
Current Draw: 5 amps
-
Supplied Cable Length: 70 feet
-
Supplied Cable Gauge: 12 gauge
-
Minimum Anchor Weight: 25 pounds per anchor point
-
Maximum Cable Length with 12 AWG Cable: 650 feet from the motor to the main power source
-
Maximum Cable Length with 10 AWG Cable: 1,020 feet from the motor to the main power source
-
Maximum Cable Length with 8 AWG Cable: 1,610 feet from the motor to the main power source
-
Maximum Cable Length with 6 AWG Cable: 2,510 feet from the motor to the main power source
-
Maximum Cable Length with 4 AWG Cable: 3,880 feet from the motor to the main power source
-
Maximum Cable Length with 2 AWG Cable: 5,880 feet from the motor to the main power source
-
Extension Cord Use: Do not use an extension cord to supply power to the motor.
-
Motor Construction: Stainless-steel, oil-free and submersible
-
Water Compatibility: Fresh water and salt water
-
Maintenance Requirement: No routine maintenance or oil changes required
-
Control Box Requirement: No separate control box required
-
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
-
Swimmer Safety: Disconnect power whenever swimmers are present.
-
Testing and Compliance: ARL-tested and compliant with applicable UL standards and the National Electrical Code when installed as a complete package.
Compatibility
-
Compatible With: Small residential freshwater and saltwater ponds.
-
Electrical Configuration: 230-volt power installations.
Included
- 70-foot, 12-gauge supplied power cable
Not Included
