The Baystone Fountain is designed for small residential ponds and creates a distinctive center peak surrounded by a traditional outer spray pattern. Its moving-water display enhances the pond’s appearance while helping support a healthier aquatic environment.
This configuration uses a ¾-hp, 230-volt motor that circulates water at 65 gallons per minute. It produces a spray pattern measuring up to 10 feet high by 25 feet wide and requires a minimum pond depth of 44 inches.
The stainless-steel, oil-free, submersible motor is designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box.
Key Features
Distinctive Spray Pattern: Produces a center peak surrounded by a traditional outer spray pattern.
Residential Pond Application: Designed for small residential ponds.
Water Circulation: Delivers a flow rate of 65 gallons per minute.
Oil-Free Motor: Eliminates the need for motor oil changes.
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
Low-Maintenance Design: Requires no routine maintenance or separate control box.
Continuous Operation: Designed for operation 24 hours per day.
Freshwater and Saltwater Use: Suitable for operation in both fresh and salt water.
Cold-Weather Installation: May remain installed during freezing conditions after the power is switched off. Power can be restored after the ice thaws.
Optional Lighting: Compatible light kits may be selected during purchase or added later.
Made in the USA: Manufactured in Holland, Michigan.
Specifications
Motor Power: ¾ hp
Voltage: 230 V
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 6.8 amps
Flow Rate: 65 gallons per minute
Spray Dimensions: Up to 10 feet high × 25 feet wide
Minimum Pond Depth: 44 inches
Supplied Power Cord: 100 feet long, 12-gauge and submersible
Longer Power Cord Availability: Electric power cords may be ordered in greater lengths.
Motor Construction: Stainless-steel, oil-free and submersible
Water Compatibility: Fresh water and salt water
Operating Capability: Designed for 24-hour-per-day operation
Maintenance Requirement: No routine maintenance or oil changes required
Control Box Requirement: No separate control box required
Required Anchoring Weight: Two 20-pound weights or concrete blocks
Required Anchoring Lines: Two nylon ropes
Electrical Protection: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
Spray Height: Up to 10 feet
Spray Width: Up to 25 feet
Minimum Pond Depth: 44 inches
Compatibility
Compatible With: Small residential freshwater and saltwater ponds.
Electrical Configuration: 230-volt power installations.
Compatible Lighting: Light kits offered for this fountain may be added during purchase or later.
Included
Baystone brass nozzle
100-foot, 12-gauge submersible electric power cord
Not Included
Two 20-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
