The Cambridge Fountain is designed for small residential ponds and produces an impressive multi-tiered classic spray pattern. Its moving-water display enhances the appearance of the pond while helping support a healthier aquatic environment.
This configuration uses a ¾-hp, 230-volt motor with a flow rate of 65 gallons per minute. The fountain creates a spray pattern measuring up to 25 feet high by 35 feet wide and requires a minimum pond depth of 44 inches.
Its stainless-steel, oil-free, submersible motor is designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box.
Key Features
Multi-Tiered Spray Pattern: Creates a classic multi-tiered water display measuring up to 25 feet high by 35 feet wide.
Residential Pond Application: Designed for small residential ponds.
Water Circulation: Delivers a flow rate of 65 gallons per minute.
Oil-Free Motor: Requires no motor oil changes.
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
Low-Maintenance Design: Requires no routine maintenance or separate control box.
Continuous Operation: Designed for operation 24 hours per day.
Freshwater and Saltwater Use: Approved for operation in both fresh and salt water.
Cold-Weather Installation: The fountain may remain installed during freezing conditions after the power is switched off. Power can be restored after the ice thaws.
Easy Installation: Designed for straightforward pond installation.
Optional Lighting: Compatible fountain light kits may be selected during purchase or added later.
Made in the USA: Manufactured in Holland, Michigan.
Specifications
Motor Power: ¾ hp
Voltage: 230 V
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 6.8 amps
Flow Rate: 65 gallons per minute
Spray Dimensions: Up to 25 feet high × 35 feet wide
Minimum Pond Depth: 44 inches
Standard Power Cord: 100 feet long, 12-gauge and submersible
Available Cord Lengths: 100 feet, 150 feet, 200 feet and 250 feet
Longer Power Cord Availability: Electric power cords may be ordered in greater lengths.
Motor Construction: Stainless-steel, oil-free and submersible
Water Compatibility: Fresh water and salt water
Operating Capability: Designed for 24-hour-per-day operation
Maintenance Requirement: No routine maintenance required
Control Box Requirement: No separate control box required
Required Anchoring Weight: Two 20-pound weights or concrete blocks
Required Anchoring Lines: Two nylon ropes
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
Spray Height: Up to 25 feet
Spray Width: Up to 35 feet
Minimum Pond Depth: 44 inches
Compatibility
Compatible With: Small residential freshwater and saltwater ponds.
Electrical Configuration: 230-volt power installations.
Compatible Lighting: Color-changing LED and LED “Night Glo” fountain light sets offered through the product options.
Included
Cambridge brass nozzle
Submersible electric power cord in the selected available cord length
Not Included
Two 20-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
