The Clover Fountain creates a bold water display for medium-sized residential ponds. A prominent central spray rises above four angled streams that extend outward in a clover-inspired formation.
This ¾-hp, 115-volt configuration delivers a flow rate of 65 gallons per minute. Its spray pattern reaches up to 25 feet high by 30 feet wide and requires a minimum pond depth of 40 inches.
The stainless-steel, oil-free, submersible motor is designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box.
Key Features
-
Clover-Inspired Display: Produces a prominent central spray surrounded by four outward-angled streams.
-
Water Circulation: Promotes circulation and helps increase oxygen levels to support a balanced aquatic environment.
-
Brass Center Nozzle: Uses a sturdy brass nozzle to create the central water plume.
-
Oil-Free Motor: Requires no oil changes.
-
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
-
Low-Maintenance Operation: No routine maintenance or separate control box is required.
-
Continuous Operation: Designed for operation 24 hours per day.
-
Freshwater and Saltwater Use: Designed for use in fresh and salt water.
-
Optional Lighting: Compatible light kits can be selected during purchase or added later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: ¾ hp
-
Voltage: 115 V
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Current Draw: 10.7 amps
-
Flow Rate: 65 gallons per minute
-
Spray Dimensions: 25 feet high × 30 feet wide
-
Minimum Pond Depth: 40 inches
-
Standard Power Cord: 100 feet long, 10-gauge, submersible, with plug
-
Alternate Electrical Configurations: Also available in three-phase and/or 50 Hz versions
-
Motor Construction: Stainless-steel, oil-free and submersible
-
Water Compatibility: Fresh water and salt water
-
Operating Capability: Designed for 24-hour-per-day operation
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No separate control box required
-
Required Anchoring Weight: Two 20-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
-
Swimmer Safety: Always disconnect power when swimmers are present.
-
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
-
Spray Height: 25 feet
-
Spray Width: 30 feet
-
Minimum Pond Depth: 40 inches
Compatibility
-
Compatible With: Medium-sized residential freshwater and saltwater ponds.
-
Electrical Application: For proper operation of the 115-volt motor, the distance from the main breaker to the fountain must not exceed 100 feet. A 230-volt motor should be selected when the distance exceeds 100 feet.
-
Compatible Lighting: Color Changing LED and LED “Night Glo” two-light and four-light sets offered through the product options.
Included
- Clover brass center nozzle
- Submersible electric power cord in the selected available cord length
- Plug with the standard 115-volt power cord
Not Included
- Two 20-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
- Light set Not Included
