The Dock Mount AquaSweep helps clear floating debris and direct water toward bottom muck, silt, weeds, and decaying organic material around docks, shorelines, beaches, canals, and swimming areas.
The ¾ HP 115V configuration moves up to 450 gallons of water per minute with a flow distance of 60 feet. Its weed-resistant debris shield supports continuous operation by helping prevent vegetation from clogging the moving components.
The unit can be adjusted horizontally and vertically to focus the water movement on a specific surface or bottom area.
Key Features
-
450-Gallon Flow Rate: Moves up to 450 gallons of water per minute.
-
60-Foot Flow Distance: Directs water across a distance of up to 60 feet.
-
Surface-Debris Cleanup: Helps move algae, trash, and decaying floating material.
-
Bottom-Muck Movement: Helps move muck, silt, weeds, and decaying leaves.
-
Debris Shield: Helps protect moving components from clogging.
-
Continuous-Run Capability: Designed for continuous water movement.
-
Directional Adjustment: Can be aimed toward specific waterfront areas.
-
Vertical Adjustment: Supports bottom and surface applications.
-
Freshwater and Saltwater Use: Designed for both water types.
-
No Routine Maintenance: Uses an oil-free, submersible motor without a separate control box.
Specifications
-
Motor Power: ¾ HP
-
Voltage: 115V
-
Motor Type: Oil-free, fully submersible electric motor
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 0.55 kW
-
Current Draw: 10.7 amps
-
Flow Rate: 450 gallons per minute
-
Flow Distance: 60 feet
-
Standard Power Cord: 50-foot, 10-gauge submersible cord
-
Selectable Cord Lengths: 50 feet and 100 feet
-
Water Compatibility: Fresh water and salt water
-
Unit Length: Over 7 feet
-
Unit Weight: 55–68 pounds
-
Construction: High-density polyurethane and stainless steel
-
Alternate Electrical Configurations: Three-phase and/or 50 Hz versions are available by request.
-
Electrical Protection: A GFCI is required.
-
Safety Requirement: Disconnect power whenever swimmers are present.
-
Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
-
Recommended Bottom Position: Approximately 2–4 inches above the bottom
-
Maximum Yoke Reach: Up to 7 feet deep
-
Overall Unit Length: Over 7 feet
-
Unit Weight Range: 55–68 pounds
Compatibility
-
Suitable Applications: Docks, canals, beaches, shorelines, swimming areas, and boat lifts
-
Compatible Water Types: Fresh water and salt water
-
Selectable Mounting Options: Standard Dock Plate, Dock Post Bracket Upgrade, Truss Mount Bracket Upgrade, or Tripod Mount
Included
- Dock Mount AquaSweep unit
- Stainless-steel yoke assembly
- Submersible power cord in the selected length
- Selected mounting configuration
