The Dock Mount AquaSweep is a dock-mounted water-circulation system intended for moving surface debris and clearing material from waterfront bottoms. Its directional and vertical adjustments allow the water stream to be aimed toward specific areas around docks, shorelines, canals, beaches, and boat lifts.
The ½ HP 230V configuration moves up to 400 gallons of water per minute with a flow distance of 40 feet. A debris shield helps reduce clogging caused by weeds, grass, and other materials.
The fully submersible motor is oil-free and designed for fresh or saltwater use without routine maintenance or a separate control box.
Key Features
-
400-Gallon Flow Rate: Moves up to 400 gallons of water per minute.
-
40-Foot Flow Distance: Directs water across a distance of up to 40 feet.
-
Surface and Bottom Applications: Targets floating debris or bottom muck and sediment.
-
Debris-Shield Protection: Helps reduce clogging from grass and weeds.
-
Directional Adjustment: Allows the unit to be aimed around the dock.
-
Vertical Adjustment: Allows targeting of surface algae, weedy areas, or bottom muck.
-
Continuous Operation: Designed for continuous water movement.
-
Freshwater and Saltwater Use: Approved for both water types.
-
Oil-Free Motor: Requires no oil changes.
-
Low-Maintenance Design: Requires no routine maintenance.
Specifications
-
Motor Power: ½ HP
-
Voltage: 230V
-
Motor Type: Oil-free, fully submersible electric motor
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 0.37 kW
-
Current Draw: 5 amps
-
Flow Rate: 400 gallons per minute
-
Flow Distance: 40 feet
-
Standard Power Cord: 50-foot, 12-gauge submersible cord
-
Selectable Cord Lengths: 50 feet and 100 feet
-
Water Compatibility: Fresh water and salt water
-
Unit Length: Over 7 feet
-
Unit Weight: 55–68 pounds
-
Construction: High-density polyurethane and stainless steel
-
Alternate Electrical Configurations: Three-phase and/or 50 Hz versions are available by request.
-
Electrical Protection: A GFCI is required.
-
Safety Requirement: Disconnect power whenever swimmers are present.
-
Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
-
Recommended Bottom Position: Approximately 2–4 inches above the bottom
-
Maximum Yoke Reach: Up to 7 feet deep
-
Overall Unit Length: Over 7 feet
-
Unit Weight Range: 55–68 pounds
Compatibility
-
Suitable Applications: Docks, canals, beaches, shorelines, swimming areas, and boat lifts
-
Compatible Water Types: Fresh water and salt water
-
Selectable Mounting Options: Standard Dock Plate, Dock Post Bracket Upgrade, Truss Mount Bracket Upgrade, or Tripod Mount
Included
- Dock Mount AquaSweep unit
- Stainless-steel yoke assembly
- Submersible power cord in the selected length
- Selected mounting configuration
