The Gusher Fountain creates a dense, cascading vertical column of water for large ponds and commercial water features. Its concentrated geyser-style display is designed to remain visually defined even in windy conditions.
This 2-hp, 230-volt configuration circulates water at 130 gallons per minute and produces a vertical spray measuring 40 feet high according to the motor-specific Specifications section. A minimum pond depth of 56 inches is required.
The stainless-steel, oil-free, submersible motor is designed for continuous fresh- or saltwater operation. It requires no oil changes, routine maintenance, or separate control box.
Key Features
-
Vertical Geyser-Style Display: Produces a dense, cascading column of water for large ponds and commercial water features.
-
Wind-Resistant Pattern: The concentrated vertical stream is designed to maintain its display in windy conditions.
-
Water Clarity Support: Adds oxygen to the water to help maintain water clarity and assist with the breakdown of natural material.
-
Oil-Free Motor: Requires no motor oil or oil changes.
-
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
-
Low-Maintenance Operation: Requires no routine maintenance or separate control box.
-
Continuous Operation: Designed for operation 24 hours per day.
-
Freshwater and Saltwater Use: Designed for operation in both fresh and salt water.
-
Easy Installation: Designed for straightforward installation.
-
Optional Lighting: Compatible fountain light kits can be selected during purchase or added later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: 2 hp
-
Voltage: 230 V
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 1.5 kW
-
Current Draw: 10 amps
-
Flow Rate: 130 gallons per minute
-
Spray Pattern: Dense, cascading vertical water column
-
Spray Height: 40 feet
-
Minimum Pond Depth: 56 inches
-
Standard Power Cord: 100 feet long, 10-gauge, and submersible
-
Longer Power Cord Availability: The electric power cord may be ordered in greater lengths.
-
Alternate Electrical Configurations: Also available in three-phase and/or 50 Hz configurations.
-
Motor Construction: Stainless-steel, oil-free, and submersible
-
Water Compatibility: Fresh water and salt water
-
Operating Capability: Designed for 24-hour-per-day operation
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No separate control box required
-
Required Anchoring Weight: Two 45-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
-
Swimmer Safety: Always disconnect power when swimmers are present.
-
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
-
Spray Height: 40 feet
-
Minimum Pond Depth: 56 inches
Compatibility
-
Compatible With: Large freshwater and saltwater ponds and commercial water features.
-
Electrical Configuration: 230-volt power installations.
-
Compatible Lighting: Color-changing LED and LED “Night Glo” two-light and four-light options available through the product selector.
Included
- Submersible 10-gauge electric power cord in the selected available length.
Not Included
- Two 45-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
- Light set Not Included
