The Gusher Fountain creates a dense, cascading vertical water column for small residential ponds. Its concentrated, wind-resistant spray pattern reaches up to 15 feet high and provides a continuously changing geyser-style display.
The frothy stream adds oxygen to the pond, helps maintain water clarity, supports the natural breakdown of decaying vegetation, and creates rapid movement that helps discourage mosquito breeding.
This ½-hp, 230-volt configuration uses a stainless-steel, oil-free, submersible motor designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box
Key Features
-
Vertical Geyser-Style Display: Produces a dense, cascading vertical column of water.
-
Wind-Resistant Spray Pattern: The concentrated vertical stream is designed to remain visually defined in windy conditions.
-
Highly Aerated Stream: Adds oxygen to the pond while producing a frothy water display.
-
Water Clarity Support: Helps maintain clear water through continuous circulation and aeration.
-
Organic Matter Breakdown: Supports the natural breakdown of decaying vegetation.
-
Mosquito Control Support: Rapid water movement helps inhibit mosquito breeding.
-
Oil-Free Motor: Requires no motor oil or oil changes.
-
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
-
Low-Maintenance Operation: Requires no routine maintenance or separate control box.
-
Continuous Operation: Designed for operation 24 hours per day.
-
Freshwater and Saltwater Use: Designed for use in both fresh and salt water.
-
Optional Lighting: Compatible fountain light kits can be added during the initial purchase or later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: ½ hp
-
Voltage: 230 V
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Current Draw: 5 amps
-
Flow Rate: 50 gallons per minute
-
Spray Pattern: Dense, cascading vertical water column
-
Spray Height: 15 feet
-
Minimum Pond Depth: 36 inches
-
Standard Power Cord: 70 feet long, 12-gauge, and submersible
-
Longer Power Cord Availability: The electric power cord may be ordered in greater lengths.
-
Alternate Electrical Configurations: Also available in three-phase and/or 50 Hz configurations.
-
Motor Construction: Stainless-steel, oil-free, and submersible
-
Water Compatibility: Fresh water and salt water
-
Operating Capability: Designed for 24-hour-per-day operation
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No separate control box required
-
Required Anchoring Weight: Two 25-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
-
Swimmer Safety: Always disconnect power when swimmers are present.
-
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
-
Spray Height: 15 feet
-
Minimum Pond Depth: 36 inches
- Compatibility
-
Compatible With: Small residential freshwater and saltwater ponds.
-
Electrical Configuration: 230-volt power installations.
-
Compatible Lighting: Color-changing LED and LED “Night Glo” two-light and four-light sets offered through the product options.
Included
- Submersible 12-gauge electric power cord in the selected available length
Not Included
- Two 25-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
- Light set Not Included
