The Gusher Fountain creates a dense, cascading vertical column of water for small residential ponds. Its wind-resistant spray pattern rises up to 15 feet, producing a full and continuously changing display.
The highly aerated stream adds oxygen to the water, helps maintain water clarity, supports the natural breakdown of decaying vegetation, and creates rapid water movement that helps inhibit mosquito breeding.
This ½-hp, 115-volt configuration uses a stainless-steel, oil-free, submersible motor designed for continuous fresh- or saltwater operation. It requires no oil changes, routine maintenance, or separate control box.
Key Features
Vertical Geyser-Style Display: Produces a dense, cascading vertical column of water.
Wind-Resistant Spray Pattern: The concentrated vertical stream is designed to remain visually defined in windy conditions.
Highly Aerated Stream: Adds oxygen to the water while creating a frothy fountain display.
Water Clarity Support: Helps maintain clear water through continuous circulation and aeration.
Organic Matter Breakdown: Supports the natural breakdown of decaying vegetation in the pond.
Mosquito Control Support: Rapid water movement helps inhibit mosquito breeding.
Oil-Free Motor: Requires no motor oil or oil changes.
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
Low-Maintenance Operation: Requires no routine maintenance or separate control box.
Continuous Operation: Designed for operation 24 hours per day.
Freshwater and Saltwater Use: Designed for use in both fresh and salt water.
Optional Lighting: Compatible fountain light kits can be added during the initial purchase or later.
Made in the USA: Manufactured in Holland, Michigan.
Specifications
Motor Power: ½ hp
Voltage: 115 V
Frequency: 60 Hz
Phase: Single-phase
Motor Speed: 3,450 rpm
Current Draw: 10 amps
Flow Rate: 50 gallons per minute
Spray Pattern: Dense, cascading vertical water column
Spray Height: 15 feet
Minimum Pond Depth: 36 inches
Standard Power Cord: 70 feet long, 12-gauge, submersible, with plug
Longer Power Cord Availability: The electric power cord may be ordered in greater lengths.
Alternate Electrical Configurations: Also available in three-phase and/or 50 Hz configurations.
Motor Construction: Stainless-steel, oil-free, and submersible
Water Compatibility: Fresh water and salt water
Operating Capability: Designed for 24-hour-per-day operation
Maintenance Requirement: No maintenance required
Control Box Requirement: No separate control box required
Required Anchoring Weight: Two 25-pound weights or concrete blocks
Required Anchoring Lines: Two nylon ropes
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
Swimmer Safety: Always disconnect power when swimmers are present.
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
Spray Height: 15 feet
Minimum Pond Depth: 36 inches
Compatibility
Compatible With: Small residential freshwater and saltwater ponds.
Electrical Application: The distance from the main breaker to the fountain must not exceed 100 feet when using the 115-volt motor. A 230-volt motor should be selected when the distance exceeds 100 feet.
Compatible Lighting: Color-changing LED and LED “Night Glo” two-light and four-light sets offered through the product options.
Included
Submersible 12-gauge electric power cord in the selected available length
Plug with the 115-volt power cord
Not Included
Two 25-pound anchoring weights or concrete blocks
Two nylon anchoring ropes
Light set Not Included
