The Jet Stream Fountain creates a tight vertical jet for large commercial ponds and lakes. Its clean, upright column produces a prominent water display with a consistent sound, while optional lighting can extend the display into evening hours.
This 2-hp, 230-volt configuration circulates water at 120 gallons per minute and produces a vertical spray reaching 70 feet high. Continuous circulation introduces oxygen into the water, supports the natural decomposition of organic matter, and creates surface agitation that makes the pond less inviting for mosquito activity.
The stainless-steel, oil-free, submersible motor is designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box.
Key Features
-
Tight Vertical Jet: Produces a clean, upright column of water for a dramatic commercial-pond display.
-
Large-Pond Application: Designed for large commercial ponds and lakes.
-
Water Circulation: Moves water at a rate of 120 gallons per minute.
-
Oxygen Transfer: Introduces additional oxygen into the water through continuous circulation.
-
Organic Matter Breakdown: Increased circulation and oxygen support the natural decomposition of organic material.
-
Mosquito Deterrence: Constant surface agitation makes the water less inviting for mosquito activity.
-
Oil-Free Motor: Requires no motor oil or oil changes.
-
Submersible Construction: Uses a stainless-steel, oil-free, submersible motor.
-
Low-Maintenance Operation: Requires no routine maintenance or separate control box.
-
Continuous Operation: Designed for operation 24 hours per day.
-
Freshwater and Saltwater Use: Designed for operation in fresh and salt water.
-
Easy Installation: Designed for straightforward pond installation.
-
Optional Lighting: Compatible fountain light kits may be selected during purchase or added later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: 2 hp
-
Voltage: 230 V
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 1.5 kW
-
Current Draw: 10 amps
-
Flow Rate: 120 gallons per minute
-
Spray Pattern: Tight vertical water jet
-
Spray Height: 70 feet
-
Minimum Pond Depth: 56 inches
-
Standard Power Cord: 100 feet long, 10-gauge, and submersible
-
Longer Power Cord Availability: The electric power cord may be ordered in greater lengths.
-
Alternate Electrical Configurations: Also available in three-phase and/or 50 Hz configurations.
-
Motor Construction: Stainless-steel, oil-free, and submersible
-
Water Compatibility: Fresh water and salt water
-
Operating Capability: Designed for 24-hour-per-day operation
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No separate control box required
-
Required Anchoring Weight: Two 45-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Required Electrical Protection: A Ground Fault Circuit Interrupter is required.
-
Swimmer Safety: Always disconnect power when swimmers are present.
-
Testing and Compliance: ARL-tested and compliant with UL standards and the National Electric Code when installed as a complete package.
Size Guide
-
Spray Height: 70 feet
-
Minimum Pond Depth: 56 inches
Compatibility
-
Compatible With: Large commercial freshwater and saltwater ponds and lakes.
-
Electrical Configuration: 230-volt power installations.
-
Compatible Lighting: Color Changing LED and LED “Night Glo” two-light and four-light sets offered through the selectable product options.
Included
- Submersible 10-gauge electric power cord in the selected available length.
Not Included
- Two 45-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
- Light set Not Included
