The Triad Fountain is designed for large commercial ponds and lakescapes that need both a decorative water display and improved water movement. It includes three interchangeable brass nozzles, allowing the display to be changed between Rosewood, Gusher, and Skyward spray patterns without tools.
The 2 HP configuration moves approximately 130–135 gallons of water per minute, depending on the installed nozzle. The Rosewood pattern reaches up to 35 feet high and 45 feet wide, the Gusher reaches up to 40 feet high, and the Skyward reaches up to 45 feet high and 60 feet wide.
Its stainless-steel, oil-free submersible motor is designed for continuous operation in fresh or salt water. The fountain requires no oil changes, routine maintenance, or separate control box and may remain installed during freezing conditions when the power is switched off.
Key Features
-
Three Interchangeable Spray Patterns: Includes Rosewood, Gusher, and Skyward brass nozzles.
-
Tool-Free Nozzle Changes: Each nozzle installs quickly and can be changed without tools.
-
Rosewood Display: Produces a multi-tiered classic spray pattern reaching up to 35 feet high × 45 feet wide.
-
Gusher Display: Produces a voluminous vertical column reaching up to 40 feet high.
-
Skyward Display: Produces a vertical column supported by a wide spray pattern reaching up to 45 feet high × 60 feet wide.
-
Water Circulation: Moves approximately 130–135 gallons per minute, depending on the installed nozzle.
-
Oil-Free Motor: Uses a stainless-steel, oil-free submersible motor that requires no oil changes.
-
Low-Maintenance Operation: Requires no routine maintenance or separate control box.
-
Continuous Operation: Designed for 24-hour-per-day operation.
-
Freshwater and Saltwater Use: Approved for operation in fresh water and salt water.
-
Winter-Ready Design: May remain installed during freezing conditions with the power switched off.
-
Optional Fountain Lighting: Compatible light kits can be selected during purchase or added later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: 2 HP
-
Voltage: 230V
-
Motor Type: Stainless-steel, oil-free, submersible motor
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 1.5 kW
-
Current Draw: 10 amps
-
Flow Rate: 130–135 gallons per minute, depending on nozzle
-
Standard Power Cord: 100-foot, 10-gauge submersible cord
-
Extended Cord Availability: The electric power cord may be ordered in greater lengths.
-
Minimum Pond Depth: 56 inches
-
Required Anchoring Weight: Two 45-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Operating Capability: Designed for 24-hour-per-day operation
-
Water Compatibility: Fresh water and salt water
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No control box required
-
Alternate Electrical Configurations: Three-phase and/or 50 Hz configurations are available by request.
-
Electrical Protection: A GFCI is required.
-
Safety Requirement: Always disconnect power when swimmers are present.
-
Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
-
Rosewood Spray Pattern: Up to 35 feet high × 45 feet wide
-
Gusher Spray Pattern: Up to 40 feet high
-
Skyward Spray Pattern: Up to 45 feet high × 60 feet wide
-
Minimum Pond Depth: 56 inches
-
Intended Application: Large commercial ponds and lakescapes
Compatibility
-
Compatible Water Types: Fresh water and salt water
-
Compatible Nozzles: Rosewood, Gusher, and Skyward brass nozzles
-
Compatible Lighting: Optional fountain light kits offered through the product page
-
Electrical Configurations by Request: Three-phase and/or 50 Hz versions
Included
- Rosewood brass nozzle
- Gusher brass nozzle
- Skyward brass nozzle
- Submersible electric power cord configured to the selected cord length
Not Included
- Two 45-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
