The Triad Fountain provides three interchangeable decorative spray patterns for large commercial ponds and lakescapes. Its supplied Rosewood, Gusher, and Skyward brass nozzles can be exchanged quickly without tools, allowing the water display to be changed for different settings or preferences.
The 3 HP configuration moves approximately 170–175 gallons of water per minute, depending on the installed nozzle. The Rosewood pattern reaches up to 45 feet high and 55 feet wide, the Gusher reaches up to 50 feet high, and the Skyward reaches up to 50 feet high and 70 feet wide.
The fountain uses a stainless-steel, oil-free submersible motor designed for continuous fresh or saltwater operation. It requires no oil changes, routine maintenance, or separate control box and may remain installed during freezing conditions when the power is switched off
Key Features
-
Three Interchangeable Spray Patterns: Includes Rosewood, Gusher, and Skyward brass nozzles.
-
Tool-Free Nozzle Changes: Each nozzle can be installed and exchanged without tools.
-
Rosewood Display: Produces a multi-tiered classic spray pattern reaching up to 45 feet high × 55 feet wide.
-
Gusher Display: Produces a voluminous vertical column reaching up to 50 feet high.
-
Skyward Display: Produces a vertical column supported by a wide spray pattern reaching up to 50 feet high × 70 feet wide.
-
High Water Flow: Moves approximately 170–175 gallons per minute, depending on the installed nozzle.
-
Oil-Free Motor: Uses a stainless-steel, oil-free submersible motor.
-
Low-Maintenance Operation: Requires no oil changes, routine maintenance, or separate control box.
-
Continuous Operation: Designed for 24-hour-per-day operation.
-
Freshwater and Saltwater Use: Approved for operation in fresh water and salt water.
-
Winter-Ready Design: May remain installed during freezing conditions after the power is switched off.
-
Optional Fountain Lighting: Compatible light kits can be selected during purchase or installed later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: 3 HP
-
Voltage: 230V
-
Motor Type: Stainless-steel, oil-free, submersible motor
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 2.2 kW
-
Current Draw: 13.3 amps
-
Flow Rate: 170–175 gallons per minute, depending on nozzle
-
Standard Power Cord: 100-foot, 10-gauge submersible cord
-
Extended Cord Availability: The electric power cord may be ordered in greater lengths.
-
Minimum Pond Depth: 60 inches
-
Required Anchoring Weight: Two 55-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Operating Capability: Designed for 24-hour-per-day operation
-
Water Compatibility: Fresh water and salt water
-
Maintenance Requirement: No maintenance required
-
Control Box Requirement: No control box required
-
Alternate Electrical Configurations: Three-phase and/or 50 Hz configurations are available by request.
-
Electrical Protection: A GFCI is required.
-
Safety Requirement: Always disconnect power when swimmers are present.
-
Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
-
Rosewood Spray Pattern: Up to 45 feet high × 55 feet wide
-
Gusher Spray Pattern: Up to 50 feet high
-
Skyward Spray Pattern: Up to 50 feet high × 70 feet wide
-
Minimum Pond Depth: 60 inches
-
Intended Application: Large commercial ponds and lakescapes
Compatibility
-
Compatible Water Types: Fresh water and salt water
-
Compatible Nozzles: Rosewood, Gusher, and Skyward brass nozzles
-
Compatible Lighting: Optional fountain light kits offered through the product page
-
Electrical Configurations by Request: Three-phase and/or 50 Hz versions
Included
- Rosewood brass nozzle
- Gusher brass nozzle
- Skyward brass nozzle
- Submersible electric power cord configured to the selected cord length
Not Included
- Two 55-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
