The Triad Fountain is a configurable decorative fountain for medium residential ponds and lakescapes. It includes three interchangeable brass nozzles that allow the water display to be changed between the Cambridge, Gusher, and Skyward patterns without requiring tools.
The ¾ HP configuration produces a flow rate of 55–65 gallons per minute, depending on the installed nozzle. Its Cambridge pattern reaches up to 25 feet high and 35 feet wide, the Gusher creates a vertical display up to 20 feet high, and the Skyward reaches up to 25 feet high and 30 feet wide.
The stainless-steel, oil-free submersible motor is designed for continuous operation in fresh or salt water. It requires no oil changes, routine maintenance, or separate control box.
Key Features
-
Three Interchangeable Nozzles: Includes Cambridge, Gusher, and Skyward brass nozzles.
-
Tool-Free Pattern Changes: Each nozzle can be exchanged in minutes without tools.
-
Cambridge Display: Creates a multi-tiered spray pattern reaching up to 25 feet high × 35 feet wide.
-
Gusher Display: Creates a dense vertical column reaching up to 20 feet high.
-
Skyward Display: Creates a vertical center stream with a surrounding spray reaching up to 25 feet high × 30 feet wide.
-
Water Circulation: Moves approximately 55–65 gallons per minute, depending on the selected nozzle.
-
Oil-Free Motor: Uses a stainless-steel, oil-free submersible motor.
-
Low-Maintenance Operation: Requires no routine maintenance, oil changes, or separate control box.
-
Continuous Operation: Designed for 24-hour-per-day use.
-
Freshwater and Saltwater Use: Approved for operation in fresh and salt water.
-
Winter-Ready Construction: May remain installed during freezing conditions with power switched off.
-
Optional Lighting: Compatible light kits can be selected during purchase or added later.
-
Made in the USA: Manufactured in Holland, Michigan.
Specifications
-
Motor Power: ¾ HP
-
Voltage: 115V
-
Motor Construction: Stainless-steel, oil-free, submersible motor
-
Frequency: 60 Hz
-
Phase: Single-phase
-
Motor Speed: 3,450 rpm
-
Power Rating: 0.55 kW
-
Current Draw: 10.7 amps
-
Flow Rate: 55–65 gallons per minute, depending on nozzle
-
Power Cord Type: 10-gauge submersible cord with plug
-
Selectable Cord Configuration: 100 feet
-
Minimum Pond Depth: 44 inches
-
Required Anchoring Weight: Two 30-pound weights or concrete blocks
-
Required Anchoring Lines: Two nylon ropes
-
Operating Capability: Designed for 24-hour-per-day operation
-
Water Compatibility: Fresh water and salt water
-
Maintenance Requirement: No routine maintenance required
-
Alternate Electrical Configurations: Three-phase and/or 50 Hz configurations are available by request.
-
Electrical Protection: A GFCI is required.
-
Safety Requirement: Power must be disconnected whenever swimmers are present.
-
Compliance: ARL-tested and compliant with UL standards and the National Electrical Code when installed as a complete package.
Size Guide
-
Cambridge Spray Pattern: Up to 25 feet high × 35 feet wide
-
Gusher Spray Pattern: Up to 20 feet high
-
Skyward Spray Pattern: Up to 25 feet high × 30 feet wide
-
Minimum Pond Depth: 44 inches
-
Intended Application: Medium residential ponds and lakescapes
Compatibility
-
Compatible Water Types: Fresh water and salt water
-
Compatible Nozzles: Cambridge, Gusher, and Skyward nozzles supplied with this configuration
-
Compatible Lighting: Optional residential fountain light kits offered for the product
-
Electrical Limitation: The distance from the main breaker to a 115V fountain must not exceed 100 feet.
Included
- Cambridge brass nozzle
- Gusher brass nozzle
- Skyward brass nozzle
- Submersible electrical power cord configured to the selected length
Not Included
- Two 30-pound anchoring weights or concrete blocks
- Two nylon anchoring ropes
