Solar Kit 5000W 48V 120V output 10.24KWH Lithium Battery 2700 Watt Solar Panel SGK-5PRO

The SunGoldPower Solar Kit 5000W 48V 120V Output 10.24KWH Lithium Battery 2700 Watt Solar Panel SGK-5PRO combines solar power generation, lithium battery storage, and AC power conversion in one comprehensive energy system. Designed around a 5000W inverter with 120V AC output, the kit includes solar panels, rechargeable LiFePO4 batteries, and essential connection accessories.

The system includes six 450W monocrystalline solar panels, four 200Ah LiFePO4 batteries with Bluetooth, and a 5000W solar inverter with Wi-Fi capability. Together, these components provide an integrated solution for collecting solar energy, storing electricity, and supplying power to compatible electrical loads.

The SGK-5PRO is supplied as a complete solar kit configuration with the components listed below.

Key Features

Specifications

• System Type: Solar Power Kit with Lithium Battery Storage
• Solar Inverter Power: 5000W
• Inverter DC Voltage: 48V
• Inverter AC Output: 120V
• Advertised Battery Storage: 10.24KWH
• Solar Panel Capacity: 2700 Watt
• Solar Panel Type: Monocrystalline
• Solar Panel Rating: 450 Watt per Panel
• Solar Panel Quantity: 6
• Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
• Battery Capacity: 200Ah per Battery
• Battery Quantity: 4
• Battery Bluetooth Connectivity: Supported
• Inverter Wi-Fi Connectivity: Supported
• Inverter Output Waveform: Pure Sine Wave
• Solar Charge Controller Technology: MPPT
• Inverter Display: LCD
• Solar Extension Cable Length: 50 Feet
• DC Breaker Rating: 160A
• PV Breaker Rating: 25A
• Included Connection Cable Size: 4AWG

How to Use

The SGK-5PRO contains high-voltage electrical equipment. Installation and electrical connections must follow the manufacturer's inverter manual, battery manual, solar panel instructions, and SGK-5PRO wiring diagram.

Wiring and installation should be completed by qualified personnel in accordance with applicable electrical codes.

Step 1: Review the Installation Documents

Before installation:

1. Read the inverter user manual.

2. Review the battery instructions.

3. Review the solar panel instructions.

4. Follow the SGK-5PRO wiring diagram for the complete system.

Step 2: Prepare the Installation Location

Install the inverter in a suitable location with sufficient ventilation and space for heat dissipation.

Avoid locations exposed to excessive moisture, dust, flammable materials, or other unsuitable environmental conditions.

Step 3: Prepare the Solar Panel Array

Use the included mounting Z-brackets and follow the applicable solar panel mounting instructions.

The kit includes six 450W monocrystalline solar panels.

Step 4: Prepare the Battery System

Follow the battery manufacturer's instructions for preparing and connecting the four included LiFePO4 batteries.

Verify the battery arrangement against the SGK-5PRO wiring diagram before making electrical connections.

Step 5: Install the Electrical Protection Components

Follow the kit wiring diagram for the placement and connection of the supplied:

• 160A DC breaker

• 25A PV breaker

• 4AWG connection cable set

Step 6: Complete the Inverter Connections

Qualified personnel should connect the photovoltaic array, battery system, and AC circuits according to the inverter manual and SGK-5PRO wiring diagram.

The inverter must not be connected in parallel with another AC input source supplying the same load.

Step 7: Configure the Inverter

Use the inverter's LCD controls to configure operating parameters appropriate for the installed solar and battery system.

Follow the inverter manual for the available charging modes, output settings, and battery parameters.

Step 8: Monitor System Operation

Use the inverter's LCD screen and status indicators to monitor operating information.

The inverter also supports Wi-Fi communication.

Important Safety Precautions

• Read all component manuals before installation.

• Disconnect the appropriate PV, AC, and battery circuit breakers before electrical installation or wiring adjustments.

• Do not reverse battery polarity.

• Do not touch high-voltage wiring terminals.

• Do not open the inverter enclosure or contact internal components.

• Keep the inverter away from children.

• Do not install the inverter in wet, oily, heavily dusty, flammable, or explosive environments.

• Maintain adequate ventilation around the inverter.

• Verify that all electrical connections are secure.

• Follow applicable national and local electrical codes.

• Use the system only within the operating limits specified for its individual components.

Compatibility

• Battery System: The included inverter is designed around a 48V DC battery configuration.
• AC Output: 120V AC
• Solar Panels: The kit includes six 450W monocrystalline solar panels.
• Battery Storage: The kit includes four 200Ah LiFePO4 batteries with Bluetooth.
• Power Sources: The inverter supports solar charging and compatible AC charging arrangements described in its user manual.
• Electrical Loads: The inverter is designed to supply compatible AC equipment within its rated operating limits.

Included

• 1 × 5000 Watt 48V DC, 120V Output Solar Inverter with Wi-Fi

• 6 × 450 Watt Monocrystalline Solar Panels

• 4 × 200Ah LiFePO4 Batteries with Bluetooth

• 6 × Sets of Solar Panel Mounting Z-Brackets

• 1 × Set of 50 Feet Solar Extension Cables for Inverter PV Input

• 1 × 160A DC Breaker

• 1 × 25A PV Breaker

• 1 × Set of 4AWG Cable for Breaker-to-Inverter Connection

Product Support

• 5000 Watt Solar Inverter Manual
• 12V 200Ah LiFePO4 Battery Manual
• 450 Watt Monocrystalline Solar Panel Manual
• The Wiring Diagram of SGK-5PRO Solar Kit